Shower Filter Installation Instructions

Build Your Own


KDF Shower Filter Installation

Shower Filter Installation Instructions


For best results, flow should not exceed 2.5 GPM at 60 psi. If necessary, replace your existing shower head with our optional water-saver shower head.  Our shower filter is designed to install on industry-standard 1/2" pipe thread. If you have a rare, non-standard "ball joint" style, adapters are available at most hardware stores to convert to standard thread.

Installation Procedure

1. Remove existing shower head from shower arm.

2. Attach existing shower head to new shower filter (provided it is 2.5 GPM or less).

3. Install new filter and head to shower pipe.  Hand-tighten only to avoid cross-threading.

Note: Under normal conditions replace filter after 12 to 15 months.


The KDF shower filter is warranted against material defects for a period of six months from the date of purchase. Sediment clogging is not covered under this warranty.


For Information Call Toll Free: 1-888-297-4887