Water-Saver Shower Head/Arms

Build Your Own


Water Saver Shower Head

Water-Saver Showerhead: Brass/Chrome American Made Shower Head- 2.5 gpm  Sale $9.95.


Part SH. This is a high-quality solid brass and chrome USA made shower head (made  in CT).  It produces a fine mist that provides an invigorating, high velocity shower using only 2.5 gallons per minute (at 80 psi). Click for installation instructions.  Use with our shower filters SF1000 and SF-E. Swivel head, 1/2" female threads. Suggested Retail - $14.95. Sale Price - $9.95. ORDER NOW! VIEW CART/CHECKOUT

Our shower head increases velocity of the water and creates a conical spray pattern of many fine droplets of just the right size, neither large and stinging or too small and misty.  The result is a more refreshing and a very wet feeling (unlike most water savers).

Installation Instructions Water Saver Shower Head

1. Unscrew existing shower head from shower arm (turn counter clockwise).  Note: If shower arm is a ball-end type, either use an adapter or replace with standard shower arm.

2. Screw new head onto threaded end of shower arm.  Make sure washer is in place and do not over tighten.

Save $$ on Water and Energy

Hot water is more expensive than ever.   By reducing the amount of water used in the shower, you can save a significant amount of both water and energy expense.  Actual savings will vary based on local cost and how much water you currently use, but an average family can save between $50 and $200 per year, or more. Most older shower heads use between 5 and 8 gallons per minute (GPM).  The SaverShower (TM) uses only 1.8 to 2.5 GPM.  If you multiply that by 4 showers per day at 7 minutes per shower you'll see there's quite a savings (see chart below).

Flow Rate Chart

Gallons Per Year Gallons Per Minute
80,000 8
60,000 6
40,000 4
20,000 2

Flow Rates   

Water pressure (psi) 30 50 80
Flow rate (gpm) 1.8 2.2 2.5


All parts are guaranteed for a period of 5 years.

For Information Call Toll Free: 1-888-297-4887